diff --git a/board/dhelectronics/dh_stm32mp1/Makefile b/board/dhelectronics/dh_stm32mp1/Makefile
index e8f218d..5758d98 100644
--- a/board/dhelectronics/dh_stm32mp1/Makefile
+++ b/board/dhelectronics/dh_stm32mp1/Makefile
@@ -7,7 +7,7 @@
 obj-y += ../../st/stm32mp1/spl.o
 endif
 
-obj-y += ../../st/stm32mp1/board.o board.o
+obj-y += ../../st/common/stpmic1.o board.o
 
 obj-$(CONFIG_SYS_MTDPARTS_RUNTIME) += ../../st/common/stm32mp_mtdparts.o
 obj-$(CONFIG_SET_DFU_ALT_INFO) += ../../st/common/stm32mp_dfu.o
diff --git a/board/st/common/Makefile b/board/st/common/Makefile
index aa030bac..012bfbb 100644
--- a/board/st/common/Makefile
+++ b/board/st/common/Makefile
@@ -4,6 +4,7 @@
 #
 
 obj-$(CONFIG_CMD_STBOARD) += cmd_stboard.o
+obj-$(CONFIG_PMIC_STPMIC1) += stpmic1.o
 
 ifeq ($(CONFIG_ARCH_STM32MP),y)
 obj-$(CONFIG_SYS_MTDPARTS_RUNTIME) += stm32mp_mtdparts.o
diff --git a/board/st/common/stpmic1.c b/board/st/common/stpmic1.c
new file mode 100644
index 0000000..41111c5
--- /dev/null
+++ b/board/st/common/stpmic1.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/arch/ddr.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <power/pmic.h>
+#include <power/stpmic1.h>
+
+int board_ddr_power_init(enum ddr_type ddr_type)
+{
+	struct udevice *dev;
+	bool buck3_at_1800000v = false;
+	int ret;
+	u32 buck2;
+
+	ret = uclass_get_device_by_driver(UCLASS_PMIC,
+					  DM_GET_DRIVER(pmic_stpmic1), &dev);
+	if (ret)
+		/* No PMIC on board */
+		return 0;
+
+	switch (ddr_type) {
+	case STM32MP_DDR3:
+		/* VTT = Set LDO3 to sync mode */
+		ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3));
+		if (ret < 0)
+			return ret;
+
+		ret &= ~STPMIC1_LDO3_MODE;
+		ret &= ~STPMIC1_LDO12356_VOUT_MASK;
+		ret |= STPMIC1_LDO_VOUT(STPMIC1_LDO3_DDR_SEL);
+
+		ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
+				     ret);
+		if (ret < 0)
+			return ret;
+
+		/* VDD_DDR = Set BUCK2 to 1.35V */
+		ret = pmic_clrsetbits(dev,
+				      STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
+				      STPMIC1_BUCK_VOUT_MASK,
+				      STPMIC1_BUCK2_1350000V);
+		if (ret < 0)
+			return ret;
+
+		/* Enable VDD_DDR = BUCK2 */
+		ret = pmic_clrsetbits(dev,
+				      STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
+				      STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA);
+		if (ret < 0)
+			return ret;
+
+		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+
+		/* Enable VREF */
+		ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR,
+				      STPMIC1_VREF_ENA, STPMIC1_VREF_ENA);
+		if (ret < 0)
+			return ret;
+
+		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+
+		/* Enable VTT = LDO3 */
+		ret = pmic_clrsetbits(dev,
+				      STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
+				      STPMIC1_LDO_ENA, STPMIC1_LDO_ENA);
+		if (ret < 0)
+			return ret;
+
+		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+
+		break;
+
+	case STM32MP_LPDDR2_16:
+	case STM32MP_LPDDR2_32:
+	case STM32MP_LPDDR3_16:
+	case STM32MP_LPDDR3_32:
+		/*
+		 * configure VDD_DDR1 = LDO3
+		 * Set LDO3 to 1.8V
+		 * + bypass mode if BUCK3 = 1.8V
+		 * + normal mode if BUCK3 != 1.8V
+		 */
+		ret = pmic_reg_read(dev,
+				    STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK3));
+		if (ret < 0)
+			return ret;
+
+		if ((ret & STPMIC1_BUCK3_1800000V) == STPMIC1_BUCK3_1800000V)
+			buck3_at_1800000v = true;
+
+		ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3));
+		if (ret < 0)
+			return ret;
+
+		ret &= ~STPMIC1_LDO3_MODE;
+		ret &= ~STPMIC1_LDO12356_VOUT_MASK;
+		ret |= STPMIC1_LDO3_1800000;
+		if (buck3_at_1800000v)
+			ret |= STPMIC1_LDO3_MODE;
+
+		ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
+				     ret);
+		if (ret < 0)
+			return ret;
+
+		/* VDD_DDR2 : Set BUCK2 to 1.2V (16bits) or 1.25V (32 bits)*/
+		switch (ddr_type) {
+		case STM32MP_LPDDR2_32:
+		case STM32MP_LPDDR3_32:
+			buck2 = STPMIC1_BUCK2_1250000V;
+			break;
+		default:
+		case STM32MP_LPDDR2_16:
+		case STM32MP_LPDDR3_16:
+			buck2 = STPMIC1_BUCK2_1200000V;
+			break;
+		}
+
+		ret = pmic_clrsetbits(dev,
+				      STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
+				      STPMIC1_BUCK_VOUT_MASK,
+				      buck2);
+		if (ret < 0)
+			return ret;
+
+		/* Enable VDD_DDR1 = LDO3 */
+		ret = pmic_clrsetbits(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
+				      STPMIC1_LDO_ENA, STPMIC1_LDO_ENA);
+		if (ret < 0)
+			return ret;
+
+		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+
+		/* Enable VDD_DDR2 =BUCK2 */
+		ret = pmic_clrsetbits(dev,
+				      STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
+				      STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA);
+		if (ret < 0)
+			return ret;
+
+		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+
+		/* Enable VREF */
+		ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR,
+				      STPMIC1_VREF_ENA, STPMIC1_VREF_ENA);
+		if (ret < 0)
+			return ret;
+
+		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+
+		break;
+
+	default:
+		break;
+	};
+
+	return 0;
+}
diff --git a/board/st/stm32mp1/board.c b/board/st/stm32mp1/board.c
index c218d37..00c61c2 100644
--- a/board/st/stm32mp1/board.c
+++ b/board/st/stm32mp1/board.c
@@ -4,13 +4,9 @@
  */
 
 #include <common.h>
-#include <dm.h>
 #include <asm/io.h>
-#include <asm/arch/ddr.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
-#include <power/pmic.h>
-#include <power/stpmic1.h>
 
 #ifdef CONFIG_DEBUG_UART_BOARD_INIT
 void board_debug_uart_init(void)
@@ -38,157 +34,3 @@
 #endif
 }
 #endif
-
-#ifdef CONFIG_PMIC_STPMIC1
-int board_ddr_power_init(enum ddr_type ddr_type)
-{
-	struct udevice *dev;
-	bool buck3_at_1800000v = false;
-	int ret;
-	u32 buck2;
-
-	ret = uclass_get_device_by_driver(UCLASS_PMIC,
-					  DM_GET_DRIVER(pmic_stpmic1), &dev);
-	if (ret)
-		/* No PMIC on board */
-		return 0;
-
-	switch (ddr_type) {
-	case STM32MP_DDR3:
-		/* VTT = Set LDO3 to sync mode */
-		ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3));
-		if (ret < 0)
-			return ret;
-
-		ret &= ~STPMIC1_LDO3_MODE;
-		ret &= ~STPMIC1_LDO12356_VOUT_MASK;
-		ret |= STPMIC1_LDO_VOUT(STPMIC1_LDO3_DDR_SEL);
-
-		ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
-				     ret);
-		if (ret < 0)
-			return ret;
-
-		/* VDD_DDR = Set BUCK2 to 1.35V */
-		ret = pmic_clrsetbits(dev,
-				      STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
-				      STPMIC1_BUCK_VOUT_MASK,
-				      STPMIC1_BUCK2_1350000V);
-		if (ret < 0)
-			return ret;
-
-		/* Enable VDD_DDR = BUCK2 */
-		ret = pmic_clrsetbits(dev,
-				      STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
-				      STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA);
-		if (ret < 0)
-			return ret;
-
-		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
-
-		/* Enable VREF */
-		ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR,
-				      STPMIC1_VREF_ENA, STPMIC1_VREF_ENA);
-		if (ret < 0)
-			return ret;
-
-		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
-
-		/* Enable VTT = LDO3 */
-		ret = pmic_clrsetbits(dev,
-				      STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
-				      STPMIC1_LDO_ENA, STPMIC1_LDO_ENA);
-		if (ret < 0)
-			return ret;
-
-		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
-
-		break;
-
-	case STM32MP_LPDDR2_16:
-	case STM32MP_LPDDR2_32:
-	case STM32MP_LPDDR3_16:
-	case STM32MP_LPDDR3_32:
-		/*
-		 * configure VDD_DDR1 = LDO3
-		 * Set LDO3 to 1.8V
-		 * + bypass mode if BUCK3 = 1.8V
-		 * + normal mode if BUCK3 != 1.8V
-		 */
-		ret = pmic_reg_read(dev,
-				    STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK3));
-		if (ret < 0)
-			return ret;
-
-		if ((ret & STPMIC1_BUCK3_1800000V) == STPMIC1_BUCK3_1800000V)
-			buck3_at_1800000v = true;
-
-		ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3));
-		if (ret < 0)
-			return ret;
-
-		ret &= ~STPMIC1_LDO3_MODE;
-		ret &= ~STPMIC1_LDO12356_VOUT_MASK;
-		ret |= STPMIC1_LDO3_1800000;
-		if (buck3_at_1800000v)
-			ret |= STPMIC1_LDO3_MODE;
-
-		ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
-				     ret);
-		if (ret < 0)
-			return ret;
-
-		/* VDD_DDR2 : Set BUCK2 to 1.2V (16bits) or 1.25V (32 bits)*/
-		switch (ddr_type) {
-		case STM32MP_LPDDR2_32:
-		case STM32MP_LPDDR3_32:
-			buck2 = STPMIC1_BUCK2_1250000V;
-			break;
-		default:
-		case STM32MP_LPDDR2_16:
-		case STM32MP_LPDDR3_16:
-			buck2 = STPMIC1_BUCK2_1200000V;
-			break;
-		}
-
-		ret = pmic_clrsetbits(dev,
-				      STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
-				      STPMIC1_BUCK_VOUT_MASK,
-				      buck2);
-		if (ret < 0)
-			return ret;
-
-		/* Enable VDD_DDR1 = LDO3 */
-		ret = pmic_clrsetbits(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
-				      STPMIC1_LDO_ENA, STPMIC1_LDO_ENA);
-		if (ret < 0)
-			return ret;
-
-		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
-
-		/* Enable VDD_DDR2 =BUCK2 */
-		ret = pmic_clrsetbits(dev,
-				      STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
-				      STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA);
-		if (ret < 0)
-			return ret;
-
-		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
-
-		/* Enable VREF */
-		ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR,
-				      STPMIC1_VREF_ENA, STPMIC1_VREF_ENA);
-		if (ret < 0)
-			return ret;
-
-		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
-
-		break;
-
-	default:
-		break;
-	};
-
-	return 0;
-}
-#endif